SOC時序分析中的跳變點介紹

　　#!/usr/local/bin/perl

　　print n***************RUNNING PERL SCRIPT negaTIvedelinsdf_assarray.pl****nn;

　　if (!exists $ARGV[0] || !exists $ARGV[1]) { print USAGE:: negativedelinsdf_assarray.plnn; exit;

　　}

　　open(FILEA,$ARGV[0]) || die (ERROR:: SDF file $ARGV[0] cannot be opened for reADIngn);

　　open(file1, >$ARGV[1]) || die (ERROR:: file $ARGV[1] cannot be opened for writingn);

　　while()

　　{ $line = $_;

　　$line1 = $line;

　　$line =~ s/^s+//g ;

　　if ( $line =~ INTERCONNECT.*-[0-9]) ######## FINDING NEGATIVE INTERCONNECT ######

　　{

　　@array1 = split(/s+/,$line);

　　$count = @array1;

　　if ($count == 4){ ## To accont for the fact that only one INTERCONNECT triplet is present

　　$array1[$count]= $array1[$count-1];

　　$count = $count + 1;

　　}

　　for($i=0;$i= $count -3;$i++)

　　{print file1 $array1[$i] ;}

　　$value2 = $array1[$count -1];

　　$value1 = $array1[$count -2];

　　$instance_name = $array1[2];

　　@instance = split(///,$instance_name);

　　$count2 = @instance;

　　$pin_name = $instance[$count2 -1]; ####### GETTING LOAD INSTANCE PIN NAME ###############

　　$instance_name =~ s//[^(.*/)][A-Z0-9a-z_[0-9]+]*$//g; ####### GETTING LOAD INSTANCE NAME ###############

　　if( $value1 =~ ::)

　　{ $value1 =~ s/[()]//g;

　　@correct_value1 = split(/::/,$value1);

　　$load_correct_value1_0{$instance_name} = $correct_value1[0];

　　$load_correct_value1_1{$instance_name} = $correct_value1[1];

　　if($correct_value1[0] = -0.0) #####NEGATIVE CHANGED TO ZERO DELAY######

　　{$correct_value1[0] = 0.000;}

　　if($correct_value1[1] = -0.0)

　　{$correct_value1[1] = 0.000;}

　　print file1 ($correct_value1[0]::$correct_value1[1]);

　　}

　　elsif( $value1 =~ :[^:])

　　{ $value1 =~ s/[()]//g;

　　@correct_value1 = split(/:/,$value1);

　　$load_correct_value1_0{$instance_name} = $correct_value1[0];

　　$load_correct_value1_1{$instance_name} = $correct_value1[1];

　　$load_correct_value1_2{$instance_name} = $correct_value1[2];

　　if($correct_value1[0] = -0.0) #####NEGATIVE CHANGED TO ZERO DELAY######

　　{$correct_value1[0] = 0.000;}

　　if($correct_value1[1] = -0.0)

　　{$correct_value1[1] = 0.000;}

　　if($correct_value1[2] = -0.0)

　　{$correct_value1[2] = 0.000;}

　　print file1 ($correct_value1[0]:$correct_value1[1]:$correct_value1[2]);

　　}

　　else{print file1 $value1 ;}

　　if( $value2 =~ ::)

　　{ $value2 =~ s/[()]//g;

　　@correct_value2 = split(/::/,$value2);

　　$load_correct_value2_0{$instance_name} = $correct_value2[0]; ########NEGATIVE CHANGED TO ZERO DELAY#####

　　$load_correct_value2_1{$instance_name} = $correct_value2[1];

　　if($correct_value2[0] = -0.0)

　　{$correct_value2[0] = 0.000;}

　　if($correct_value2[1] = -0.0)

　　{$correct_value2[1] = 0.000;}

　　if ($correct_value1[0] == $correct_value2[0] $correct_value1[1] == $correct_value2[1] ) { # Print these values only if they are differnet from the already printed values for the INTERCONNECT

　　print file1 )n;

　　} else {

　　print file1 ($correct_value2[0]::$correct_value2[1]))n;

　　}

　　}

　　elsif( $value2 =~ :[^:])

　　{ $value2 =~ s/[()]//g;

　　@correct_value2 = split(/:/,$value2);

　　$load_correct_value2_0{$instance_name} = $correct_value2[0]; ########NEGATIVE CHANGED TO ZERO DELAY#####

　　$load_correct_value2_1{$instance_name} = $correct_value2[1];

　　$load_correct_value2_2{$instance_name} = $correct_value2[2];

　　if($correct_value2[0] = -0.0)

　　{$correct_value2[0] = 0.000;}

　　if($correct_value2[1] = -0.0)

　　{$correct_value2[1] = 0.000;}

　　if($correct_value2[2] = -0.0)

　　{$correct_value2[2] = 0.000;}

　　if ($correct_value1[0] == $correct_value2[0] $correct_value1[1] == $correct_value2[1] $correct_value1[2] == $correct_value2[2]) { # Print these values only if they are differnet from the already printed values for the INTERCONNECT

　　print file1 )n;

　　} else {

　　print file1 ($correct_value2[0]:$correct_value2[1]:$correct_value2[2]))n;

　　}

　　}

　　$load_instance{$instance_name} = $instance_name; ##SAVE ALL LOAD INSTACES FOR NEG DELAY IN THE ASSOCIATIVE ARRAY##

　　$load_pin{$instance_name.$pin_name} = $pin_name; ##SAVE ALL LOAD PINS FOR NEG DELAY IN THE ASSOCIATIVE ARRAY##

　　}

　　elsif ($line =~ CELL ) {

　　print file1 $line;

　　$find = 0;

　　}

　　elsif($line =~ INSTANCE ) ##CHECKING CORRESPONDING INSTANCES AND FIND FLAG = 1 IF FOUND######

　　{

　　print file1 $line1;

　　@array2 = split(/s+/,$line);

　　$instance_name2 = $array2[1]; ##GETTING THE LOAD INSTANCE NAME FOUND HERE##########

　　$instance_name2 =~ s/[()]//g;

　　$instance_definition{$instance_name2} = $instance_name2 ;

　　if(exists $load_instance{$instance_name2}) ####COMPARE INSTANCE NAME WITH THAT SAVED IN ASSO ARRAY#####

　　{

　　if($load_instance{$instance_name2} eq $instance_name2)

　　{$find = 1;}

　　}

　　}

　　elsif($line =~ IOPATH $find == 1) ##AFTER INSTANCES ARE FOUND CHECKING FOR CORRSPONDING PINS######

　　{

　　@array4 = split(/s+/,$line);

　　if ($array4[0] =~ COND ) { ## Take care of COND statements

　　$pin_name2 = $array4[3];

　　} else {

　　$pin_name2 = $array4[1];

　　}

　　if($line =~ IOPATH exists $load_pin{$instance_name2.$pin_name2} ) {

　　if ( $load_pin{$instance_name2.$pin_name2} eq $pin_name2 )

　　{

　　@array3 = split(/s+/,$line);

　　$count3 = @array3 ;

　　@value_IOPATH = ; # This is to initialize the array to blank

　　if ($array3[0] =~ COND ) {

　　for ($j=5; $j=$count3 ; $j++) {

　　$value_IOPATH[$j-5] = $array3[$j];

　　$value_IOPATH_width = @value_IOPATH;

　　if ($count3 == 6) { #### In case there is only one triplet for COND.*IOPATH

　　$value_IOPATH[1] = $value_IOPATH[0];

　　}

　　#$value1_IOPATH = $array3[5];

　　#$value2_IOPATH = $array3[6];

　　}

　　$constant_fields = 4;

　　} elsif ($array3[0] =~ IOPATH) {

　　for ($k=3; $k=$count3 ; $k++) {

　　$value_IOPATH[$k-3] = $array3[$k];

　　$value_IOPATH_width = @value_IOPATH;

　　if ($count3 == 4) { #### In case there is only one triplet for IOPATH

　　$value_IOPATH[1] = $value_IOPATH[0];

　　}

　　#$value1_IOPATH = $array3[3];

　　#$value2_IOPATH = $array3[4];

　　}

　　$constant_fields = 2;

　　}

　　for($i=0;$i= $constant_fields;$i++)

　　{print file1 $array3[$i] ;}

　　if( $value_IOPATH[0] =~ ::) ####CORRECT OR ACCOMODATING THE NEG DELAY VALUES HERE #########

　　{ $value_IOPATH[0] =~ s/[()]//g;

　　@correct_value1_IOPATH = split(/::/,$value_IOPATH[0]);

　　if(exists $load_correct_value1_0{$instance_name2}) {

　　if($load_correct_value1_0{$instance_name2} 0.0) { # So that only negative delay value triplet is changed in the IOPATH syntax

　　if ( abs($load_correct_value1_0{$instance_name2}) $correct_value1_IOPATH[0] ) { ###the absolute value to negative delay is larger than the timing of load arc. ######

　　$correct_value1_IOPATH[0] = $correct_value1_IOPATH[0] + $load_correct_value1_0{$instance_name2};

　　} else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}

　　}

　　}

　　if(exists $load_correct_value1_1{$instance_name2})

　　{ if( $load_correct_value1_1{$instance_name2} 0.0) {

　　if ( abs($load_correct_value1_1{$instance_name2}) $correct_value1_IOPATH[1] ) {

　　$correct_value1_IOPATH[1] = $correct_value1_IOPATH[1] + $load_correct_value1_1{$instance_name2};}

　　else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}}}

　　print file1 ($correct_value1_IOPATH[0]::$correct_value1_IOPATH[1]);

　　}

　　elsif( $value_IOPATH[0] =~ :[^:]) ####CORRECT OR ACCOMODATING THE NEG DELAY VALUES HERE #########

　　{ $value_IOPATH[0] =~ s/[()]//g;

　　@correct_value1_IOPATH = split(/:/,$value_IOPATH[0]);

　　if(exists $load_correct_value1_0{$instance_name2}) {

　　if($load_correct_value1_0{$instance_name2} 0.0) { # So that only negative delay value triplet is changed in the IOPATH syntax

　　if ( abs($load_correct_value1_0{$instance_name2}) $correct_value1_IOPATH[0] ) {

　　$correct_value1_IOPATH[0] = $correct_value1_IOPATH[0] + $load_correct_value1_0{$instance_name2};

　　} else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}

　　}

　　}

　　if(exists $load_correct_value1_1{$instance_name2}) {

　　if($load_correct_value1_1{$instance_name2} 0.0) { # So that only negative delay value triplet is changed in the IOPATH syntax

　　if ( abs($load_correct_value1_1{$instance_name2}) $correct_value1_IOPATH[1] ) {

　　$correct_value1_IOPATH[1] = $correct_value1_IOPATH[1] + $load_correct_value1_1{$instance_name2};

　　} else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}

　　}

　　}

　　if(exists $load_correct_value1_2{$instance_name2}) {

　　if($load_correct_value1_2{$instance_name2} 0.0) { # So that only negative delay value triplet is changed in the IOPATH syntax

　　if ( abs($load_correct_value1_2{$instance_name2}) $correct_value1_IOPATH[2] ) {

　　$correct_value1_IOPATH[2] = $correct_value1_IOPATH[2] + $load_correct_value1_2{$instance_name2};

　　} else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}

　　}

　　}

　　print file1 ($correct_value1_IOPATH[0]:$correct_value1_IOPATH[1]:$correct_value1_IOPATH[2]);

　　}

　　else{print file1 $value_IOPATH[0] ;} # This is to print empty brackets in case rise and fall triplets are empty

　　if( $value_IOPATH[1] =~ ::)

　　{ $value_IOPATH[1] =~ s/[()]//g;

　　@correct_value2_IOPATH = split(/::/,$value_IOPATH[1]);

　　if(exists $load_correct_value2_0{$instance_name2}) {

　　if( $load_correct_value2_0{$instance_name2} 0.0)

　　{ if ( abs($load_correct_value2_0{$instance_name2}) $correct_value2_IOPATH[0] ) {

　　$correct_value2_IOPATH[0] = $correct_value2_IOPATH[0] + $load_correct_value2_0{$instance_name2};}

　　else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}}}

　　if(exists $load_correct_value2_1{$instance_name2}) {

　　if( $load_correct_value2_1{$instance_name2} 0.0)

　　{ if ( abs($load_correct_value2_1{$instance_name2}) $correct_value2_IOPATH[1] ) {

　　$correct_value2_IOPATH[1] = $correct_value2_IOPATH[1] + $load_correct_value2_1{$instance_name2};}

　　else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}}}

　　if ($correct_value1_IOPATH[0] == $correct_value2_IOPATH[0] $correct_value1_IOPATH[1] == $correct_value2_IOPATH[1]) { # Print these values only if they are differnet from the already printed values for the IOPATH

　　} else {

　　print file1 ($correct_value2_IOPATH[0]::$correct_value2_IOPATH[1]);

　　}

　　}

　　elsif( $value_IOPATH[1] =~ :[^:])

　　{ $value_IOPATH[1] =~ s/[()]//g;

　　@correct_value2_IOPATH = split(/:/,$value_IOPATH[1]);

　　if(exists $load_correct_value2_0{$instance_name2}) {

　　if( $load_correct_value2_0{$instance_name2} 0.0) {

　　if ( abs($load_correct_value2_0{$instance_name2}) $correct_value2_IOPATH[0] ) {

　　$correct_value2_IOPATH[0] = $correct_value2_IOPATH[0] + $load_correct_value2_0{$instance_name2};}

　　else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}}}

　　if(exists $load_correct_value2_1{$instance_name2}) {

　　if( $load_correct_value2_1{$instance_name2} 0.0) {

　　if ( abs($load_correct_value2_1{$instance_name2}) $correct_value2_IOPATH[1] ) {

　　$correct_value2_IOPATH[1] = $correct_value2_IOPATH[1] + $load_correct_value2_1{$instance_name2};}

　　else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}}}

　　if(exists $load_correct_value2_2{$instance_name2}) {

　　if( $load_correct_value2_2{$instance_name2} 0.0) {

　　if ( abs($load_correct_value2_2{$instance_name2}) $correct_value2_IOPATH[2] ) {

　　$correct_value2_IOPATH[2] = $correct_value2_IOPATH[2] + $load_correct_value2_2{$instance_name2};}

　　else { print IOPATH delay for $load_pin{$instance_name2.$pin_name2} of $instance_name2 is smaller than the INTERCONNECT delay n;}}}

　　if ($correct_value1_IOPATH[0] == $correct_value2_IOPATH[0] $correct_value1_IOPATH[1] == $correct_value2_IOPATH[1] $correct_value1_IOPATH[2] == $correct_value2_IOPATH[2]) { # Print these values only if they are differnet from the already printed values for the IOPATH

　　} else {

　　print file1 ($correct_value2_IOPATH[0]:$correct_value2_IOPATH[1]:$correct_value2_IOPATH[2]);

　　}

　　}

　　else{print file1 $value_IOPATH[1] ;} # This is to print empty brackets in case rise and fall triplets are empty

　　for ($m=2;$m=$value_IOPATH_width;$m++) {

　　if (exists $value_IOPATH[$m]) {

　　$value_IOPATH[$m] =~ s/)+/)/; # To account for the brackets

　　print file1 $value_IOPATH[$m];

　　}

　　}

　　if ($array4[0] =~ COND ) { ## Extra bracket for COND statements

　　print file1 ))n;

　　} else {print file1 )n;}

　　}

　　}

　　else

　　{print file1 $line1;} #######DUMPING OUT OF SDF IN FILE1######################

　　}

　　else

　　{print file1 $line1;}

　　}

　　close(file1);

　　close(fileA);

　　open(FILEA,$ARGV[0]) || die (ERROR:: SDF file $ARGV[0] cannot be opened for readingn);

　　print nn#############REPORTING INSTANCES WHOSE DEFINITION IS NOT THERE IN THE SDF#############n;

　　while()

　　{

　　$line2 = $_;

　　$line2 =~ s/^s+//g ;

　　if ( $line2 =~ INTERCONNECT.*-[0-9])

　　{ @array4 = split(/s+/,$line2);

　　$instance_name3 = $array4[2];

　　$instance_name3 =~ s//[^(.*/)][A-Z0-9a-z_[0-9]+]*$//g;

　　if(exists $instance_definition{$instance_name3})

　　{}

　　else

　　{print $line2;}

　　}

　　}

　　close(fileA);

　　print n;