linux內核工作隊列講解和源碼詳細注釋

flush_workqueue的核心處理函數為flush_cpu_workqueue：static void flush_cpu_workqueue(struct cpu_workqueue_struct *cwq)

{ if (cwq->thread == current) { // 如果是工作隊列進程正在被調度/* * Probably keventd trying to flush its own queue. So simply run * it by hand rather than deadlocking. */ // 執行完該工作隊列run_workqueue(cwq);} else { // 定義等待DEFINE_WAIT(wait);long sequence_needed;// 加鎖spin_lock_irq(cwq->lock);// 最新工作結構序號sequence_needed = cwq->insert_sequence;// 該條件是判斷隊列中是否還有沒有執行的工作結構while (sequence_needed - cwq->remove_sequence > 0) { // 有為執行的工作結構// 通過work_done等待隊列等待prepare_to_wait(cwq->work_done， wait，TASK_UNINTERRUPTIBLE);// 解鎖spin_unlock_irq(cwq->lock);// 睡眠， 由wake_up(cwq->work_done)來喚醒schedule();// 重新加鎖spin_lock_irq(cwq->lock);} // 等待清除finish_wait(cwq->work_done， wait);spin_unlock_irq(cwq->lock);}

4.3 調度工作

在大多數情況下， 并不需要自己建立工作隊列，而是只定義工作， 將工作結構掛接到內核預定義的事件工作隊列中調度， 在kernel/workqueue.c中定義了一個靜態全局量的工作隊列keventd_wq：static struct workqueue_struct *keventd_wq;

4.3.1 立即調度// 在其他函數中使用以下函數來調度工作結構， 是把工作結構掛接到工作隊列中進行調度/** * schedule_work - put work task in global workqueue * @work： job to be done * * This puts a job in the kernel-global workqueue. */ // 調度工作結構， 將工作結構添加到事件工作隊列keventd_wq int fastcall schedule_work(struct work_struct *work)

{ return queue_work(keventd_wq， work);} EXPORT_SYMBOL(schedule_work);

/** * queue_work - queue work on a workqueue * @wq： workqueue to use * @work： work to queue * * Returns 0 if @work was already on a queue， non-zero otherwise. * * We queue the work to the CPU it was submitted， but there is no * guarantee that it will be processed by that CPU. */ int fastcall queue_work(struct workqueue_struct *wq， struct work_struct *work)

{ int ret = 0， cpu = get_cpu();if (!test_and_set_bit(0， work->pending)) { // 工作結構還沒在隊列， 設置pending標志表示把工作結構掛接到隊列中if (unlikely(is_single_threaded(wq)))

cpu = singlethread_cpu;BUG_ON(!list_empty(work->entry));// 進行具體的排隊__queue_work(per_cpu_ptr(wq->cpu_wq， cpu)， work);ret = 1;} put_cpu();return ret;} EXPORT_SYMBOL_GPL(queue_work);/* Preempt must be disabled. */ // 不能被搶占static void __queue_work(struct cpu_workqueue_struct *cwq，struct work_struct *work)

{ unsigned long flags;// 加鎖spin_lock_irqsave(cwq->lock， flags);// 指向CPU工作隊列work->wq_data = cwq;// 掛接到工作鏈表list_add_tail(work->entry， cwq->worklist);// 遞增插入的序列號cwq->insert_sequence++;// 喚醒等待隊列準備處理工作結構wake_up(cwq->more_work);spin_unlock_irqrestore(cwq->lock， flags);}

4.3.2 延遲調度

4.3.2.1 schedule_delayed_work /** * schedule_delayed_work - put work task in global workqueue after delay * @work： job to be done * @delay： number of jiffies to wait * * After waiting for a given time this puts a job in the kernel-global * workqueue. */ // 延遲調度工作， 延遲一定時間后再將工作結構掛接到工作隊列int fastcall schedule_delayed_work(struct work_struct *work， unsigned long delay)

{ return queue_delayed_work(keventd_wq， work， delay);} EXPORT_SYMBOL(schedule_delayed_work);

/** * queue_delayed_work - queue work on a workqueue after delay * @wq： workqueue to use * @work： work to queue * @delay： number of jiffies to wait before queueing * * Returns 0 if @work was already on a queue， non-zero otherwise. */ int fastcall queue_delayed_work(struct workqueue_struct *wq，struct work_struct *work， unsigned long delay)

{ int ret = 0;// 定時器， 此時的定時器應該是不起效的， 延遲將通過該定時器來實現struct timer_list *timer = work->timer;if (!test_and_set_bit(0， work->pending)) { // 工作結構還沒在隊列， 設置pending標志表示把工作結構掛接到隊列中// 如果現在定時器已經起效， 出錯BUG_ON(timer_pending(timer));// 工作結構已經掛接到鏈表， 出錯BUG_ON(!list_empty(work->entry));/* This stores wq for the moment， for the timer_fn */ // 保存工作隊列的指針work->wq_data = wq;// 定時器初始化timer->expires = jiffies + delay;timer->data = (unsigned long)work;// 定時函數timer->function = delayed_work_timer_fn;// 定時器生效， 定時到期后再添加到工作隊列add_timer(timer);ret = 1;} return ret;} EXPORT_SYMBOL_GPL(queue_delayed_work);

// 定時中斷函數static void delayed_work_timer_fn(unsigned long __data)

{ struct work_struct *work = (struct work_struct *)__data;struct workqueue_struct *wq = work->wq_data;// 獲取CPU int cpu = smp_processor_id();if (unlikely(is_single_threaded(wq)))

cpu = singlethread_cpu;// 將工作結構添加到工作隊列，注意這是在時間中斷調用__queue_work(per_cpu_ptr(wq->cpu_wq， cpu)， work);}