MSP430控制段式液晶

// MSP-FET430P430 Demo - LCD, Display "0123456" on SBLCDA4 LCD
//
// Description: Displays "0123456" on SBLCDA4 LCD as used on 430 Day Watch
// board.
// ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO = 32 x ACLK = 1048576Hz
// //* An external watch crystal between XIN & XOUT is required for ACLK *//
//
// MSP430FG439
// -----------------
// /|| XIN|-
// | | | 32kHz
// --|RST XOUT|-
// | | SBLCDA4
// | | (As used on 430 Day Watch Demo board)
// +-|R33 S0 | -----------------
// 1m | - |--> | + 7 6 5 4 3 2 1 |
// +-|R23 S21 | -----------------
// 1m | COM0|-----||||
// +-|R13 COM1|------|||
// 1m | COM2|-------||
// +-|R03 COM3|--------|
// | | |
// Vss
//
// L. Westlund
// Texas Instruments Inc.
// Feb 2005
// Built with CCE Version: 3.2.0 and IAR Embedded Workbench Version: 3.21A
//******************************************************************************
#include <msp430xG43x.h>

// LCD segment definitions.
#define d 0x80
#define c 0x01
#define b 0x20
#define a 0x10

#define h 0x08
#define g 0x40
#define f 0x02
#define e 0x04

const char char_gen[] = { // As used in 430 Day Watch Demo board
a+b+c+d+e+f, // Displays "0"
b+c, // Displays "1"
a+b+d+e+g, // Displays "2"
a+b+c+d+g, // Displays "3"
b+c+f+g, // Displays "4"
a+c+d+f+g, // Displays "5"
a+c+d+e+f+g, // Displays "6"
a+b+c, // Displays "7"
a+b+c+d+e+f+g, // Displays "8"
a+b+c+d+f+g // Displays "9"
};

void main(void)
{
int i;
WDTCTL = WDTPW + WDTHOLD; // Stop watchdog timer
FLL_CTL0 |= XCAP18PF; // Set load capacitance for xtal
LCDCTL = LCDON + LCDSG0_3 + LCD4MUX; // 4mux LCD, segs0-23 = outputs
BTCTL = BT_fLCD_DIV128; // Set LCD frame freq = ACLK/128
P5SEL = 0xFC; // Set Rxx and COM pins for LCD
// For P5.0, P5.1, P4.6, P4.7 setting
// SEL bits selects Analog for the FG

for( i = 0; i < 20; i ++)
{
LCDMEM[i] = 0; // Clear LCD
}
for (i=0; i<20; ++i) // Display "0123456"
LCDMEM[i] = char_gen[i];
while(1);
}