深入理解ARM體系架構（S3C6410）---ad轉化實例

本實例是把采集的ad數據轉化后顯示在lcd屏上，在這直接把自己調試好的源碼貼出來

本文引用地址：http://www.ex-cimer.com/article/201611/317830.htm

ad轉化器相關代碼：

[cpp]view plaincopyprint?

1. voidadc_init()
2. {
4. charpreScaler=66500000/2500000-1;//PCLK=66M
5. rADCCON=(1<<14)|(preScaler<<6)|(0<<3)|(0<<2);//通道AIN0
6. //rADCCON=0x44c1;//通道AIN0
7. }
8. intread_adc()
9. {
11. rADCCON|=0x01;//startADC
13. while(rADCCON&0x1);//checkifEnable_startislow
16. while(!(rADCCON&0x8000));//checkifEC(EndofConversion)flagishigh
18. return((int)rADCDAT0&0x3ff);
19. }
21. voiddelay_adc()
22. {
23. inti,j;
24. for(i=0;i<10000000;i++)
25. for(j=0;j>10000000;j++);
26. }

lcd相關代碼：

初始化子程序：

[cpp]view plaincopyprint?

1. voidLCD_Init(void)
2. {
4. //設置LCD調光
5. //rGPFCON|=(1<<30);//設置LCD調光管腳GPF15(PWM1)為輸出
6. //rGPFDAT|=(1<<15);//rGPFDAT=0x00002000;
7. //rGPFPUD&=~(1<<30);//rGPFPUD=0x00000000;
9. //設置VD0~15
10. rGPICON=0xaaaaaaaa;//設置GPI0~15為L(zhǎng)CDVD0~15
11. rGPIPUD=0xffffffff;
15. //設置VD16~23和HSYNC、VSYNC、VDEN、VCLK
16. rGPJCON=0x00aaaaaa;
17. rGPJPUD=0xffffffff;
18. rWINCON0&=~(1<<0);
20. //LCD寄存器設置
21. rSPCON&=(~0x3);
22. rSPCON|=(1<<0);//設置RGBI/F配置
23. rMIFPCON&=~(1<<3);//設置LCD支路為一般模式
25. rVIDCON0=(0<<29)|(0<<26)|(0<<17)|(1<<16)|(9<<6)|(0<<5)|(1<<4)|(0<<3)|(0<<2);
26. rVIDCON1=1<<7;//1=RGB類型LCD設備在VCLK上升沿得到視頻數據
28. //設置屏的時序
29. rVIDTCON0=(0x00<<16)|(0x00<<8)|(0x02<<0);
30. rVIDTCON1=(0x2d<<16)|(0x04<<8)|(0x06<<0);
31. rVIDTCON2=(271<<11)|(479<<0);
33. //設置窗口格式
34. rWINCON0=11<<2;//設置24BPP
36. //設置窗口位置
37. rVIDOSD0A=(0<<11)|(0<<0);
38. rVIDOSD0B=(479<<11)|(271<<0);
39. rVIDOSD0C=(((480*272)&0xffffff)<<0);//4.3屏幕分辨率480*272
41. //設置Window1的開始和結束的緩存地址與地址在內存中的存放地址以及緩存的大小
42. rVIDW00ADD0B0=((addr>>24)<<24)|(addr&0xffffff);
43. rVIDW00ADD1B0=(addr&0xffffff+480*272);
44. rVIDW00ADD2=(0<<13)|(480<<0);
46. //設置抖動
47. rDITHMODE=(1<<5)|(1<<3)|(1<<1)|(1<<0);
49. //開顯示
50. rVIDCON0|=(3<<0);
51. rWINCON0|=(1<<0);
52. }

lcd字符顯示子程序：

[cpp]view plaincopyprint?

1. voidPaint_text(unsignedintx,unsignedinty,unsignedintcolor,unsignedcharch[],unsignedintlengx,intlengy){
2. inti,j,test,t=-1;
3. for(i=0;i<lengy;i++){
4. for(j=0;j<lengx;j++){
5. if(j%8==0){
6. test=0x80;
7. t++;
8. }
9. if(ch[t]&test)
10. LCD_BUFFER[y+i][x+j]=color;
11. else
12. LCD_BUFFER[y+i][x+j]=0xffffff;
14. test>>=1;
15. }
16. }
17. }

頭文件中字符數據定義：

[cpp]view plaincopyprint?

1. unsignedcharcharnum[10][16]={
2. {0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x24,0x18,0x00,0x00},
3. {0x00,0x00,0x00,0x10,0x70,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00},
4. {0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x04,0x04,0x08,0x10,0x20,0x42,0x7E,0x00,0x00},
5. {0x00,0x00,0x00,0x3C,0x42,0x42,0x04,0x18,0x04,0x02,0x02,0x42,0x44,0x38,0x00,0x00},
6. {0x00,0x00,0x00,0x04,0x0C,0x14,0x24,0x24,0x44,0x44,0x7E,0x04,0x04,0x1E,0x00,0x00},
7. {0x00,0x00,0x00,0x7E,0x40,0x40,0x40,0x58,0x64,0x02,0x02,0x42,0x44,0x38,0x00,0x00},
8. {0x00,0x00,0x00,0x1C,0x24,0x40,0x40,0x58,0x64,0x42,0x42,0x42,0x24,0x18,0x00,0x00},
9. {0x00,0x00,0x00,0x7E,0x44,0x44,0x08,0x08,0x10,0x10,0x10,0x10,0x10,0x10,0x00,0x00},
10. {0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x24,0x18,0x24,0x42,0x42,0x42,0x3C,0x00,0x00},
11. {0x00,0x00,0x00,0x18,0x24,0x42,0x42,0x42,0x26,0x1A,0x02,0x02,0x24,0x38,0x00,0x00}};
16. unsignedcharcharnumc[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x22,0x40,0x40,0x40,0x22,0x1C,0x00,0x00};
17. unsignedcharcharnumo[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x42,0x42,0x42,0x42,0x3C,0x00,0x00};
18. unsignedcharcharnumn[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x62,0x42,0x42,0x42,0x42,0xE7,0x00,0x00};
19. unsignedcharcharnumv[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x42,0x24,0x24,0x28,0x10,0x10,0x00,0x00};
20. unsignedcharcharnume[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x42,0x7E,0x40,0x40,0x42,0x3C,0x00,0x00};
21. unsignedcharcharnumr[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xEE,0x32,0x20,0x20,0x20,0x20,0xF8,0x00,0x00};
22. unsignedcharcharnums[]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3E,0x42,0x40,0x3C,0x02,0x42,0x7C,0x00,0x00};
23. unsignedcharcharnumi[]={0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x70,0x10,0x10,0x10,0x10,0x10,0x7C,0x00,0x00};

主函數程序：

[cpp]view plaincopyprint?

1. adc_init();
3. LCD_Init();
4. Paint_background(0xffffff,0,0,480,272);
7. while(1)
8. {
9. adc_data=read_adc();
10. adc_data=(adc_data*32226);
12. adc_data_tmp[0]=adc_data/100000/100;
13. //adc_data_tmp[1]=((adc_data/100)0000)/10000;
14. adc_data_tmp[1]=adc_data000000/1000000;
15. adc_data_tmp[2]=adc_data00000/100000;
16. adc_data_tmp[3]=adc_data0000/10000;
17. adc_data_tmp[4]=adc_data000/1000;
18. adc_data_tmp[5]=adc_data00/100;
19. adc_data_tmp[6]=adc_data0/10;
20. adc_data_tmp[7]=adc_data;
23. Paint_text(124+8*0,20,0x0,charnum[adc_data_tmp[0]],8,16);
24. Paint_text(124+8*1,20,0x0,charnum[adc_data_tmp[1]],8,16);
25. Paint_text(124+8*2,20,0x0,charnum[adc_data_tmp[2]],8,16);
26. Paint_text(124+8*3,20,0x0,charnum[adc_data_tmp[3]],8,16);
27. Paint_text(124+8*4,20,0x0,charnum[adc_data_tmp[4]],8,16);
28. Paint_text(124+8*5,20,0x0,charnum[adc_data_tmp[5]],8,16);
29. Paint_text(124+8*6,20,0x0,charnum[adc_data_tmp[6]],8,16);
30. Paint_text(124+8*7,20,0x0,charnum[adc_data_tmp[7]],8,16);
31. delay_adc();
33. }