ADC0809做的51單片機8路電壓采集

float shuju;
unsigned char sj;
unsigned int gata;
unsigned char gw,sw,bw;
unsigned char kk,tdao;

//4聯共陽數碼管，最高位顯示通道號，其他三位為電壓值
unsigned char code shuzi[]={
0xC0,0xF9,0xA4,0xB0,0x99,
0x92,0x82,0xF8,0x80,0x90};

unsigned char code duanxuan[]={0x0f,0x8f,0x4f,0xcf,0x2f,0xaf,0x6f,0xff};
sbit START=P3^1; //ALE也連接P3.1
sbit OE=P3^3;
sbit EOC=P3^2;
sbit clock=P3^0;
void delay()
{
unsigned char i;
for(i=200;i>0;i--);
}

//timer init
void Timer()
{
TMOD=0x21;

TH0=0x3c;//20ms
TL0=0xb0;

TH1=0xff;//100khz
TL1=0xfd;

}
void AD_zh()
{
START=0; //ADC0809的啟動信號
START=1;
START=0;
while(EOC==0);//等待轉換結束
OE=1; //輸出轉換數據
sj=P1; //P1口接收數據

shuju=sj;//轉換為浮點型
shuju=(shuju/51.0)*100.00;//轉換成百位數據;
gata=shuju;//轉換為整型
bw=gata/100;//分離百位
sw=(gata/10)%10;//分離十位
gw=gata%10;//分離個位
}
//timer0/counter0 interrupt
void timer0(void) interrupt 1 //T0用于產生秒信號
{
TH0=0x3c;
TL0=0xb0;
kk++;
if(kk==20)
{
kk=0;
tdao++; //用于轉換通道，測量各個通道數據
if(tdao==8)
{
tdao=0;
}
}
}
void timer1(void) interrupt 3
{
clock=~clock; //定時器產生ADC0809所需的時鐘信號
}
void display()
{
P0=shuzi[gw]; //個位
P2=0xf8&duanxuan[tdao];
delay();

P0=shuzi[sw];//十位
P2=0xf4&duanxuan[tdao];
delay();

P0=shuzi[bw]&0x7f; //電壓百位
P2=0xf2&duanxuan[tdao];
delay();

P0=shuzi[tdao+1]; //通道從1~8，每秒換一個通道
P2=0xf1&duanxuan[tdao];
delay();
}

//the main fun
void main(void)
{

uchar i;
Timer();
TR0=1;
ET0=1;
TR1=1;
ET1=1;
EA=1;

while(1)
{
AD_zh();

for(i=0;i<10;i++) //降低刷新速度，使顯示穩定

{
display();//顯示程序

}
}
}