3. 

        <meter id="pryje"><nav id="pryje"><delect id="pryje"></delect></nav></meter>
          <label id="pryje"></label>
          
	
	
          
		
			
		
          
    
    	
          
  		
          
		    
          
		      
		      
		      
		    
          
  		
          
  		
          
	
          


	


          
		
          
		            
            
        		
          
		
          







          


          
	
	
          
		
          新聞中心
          
	
          
	
          
	
          EEPW首頁 
	 > 嵌入式系統 > 設計應用 > MSP430單片機AD轉換LCD1602&TUBE顯示
          
    
          

          

          


	
	
	

          
	
          
		
          
			
          MSP430單片機AD轉換LCD1602&TUBE顯示
          
						
          
				作者：
				時間：2016-11-23
				來源：網絡
				
				
				
				
				收藏
			
          

			
          
				
				
			
          

			
          
			
			
          
			
			
          
				
				
			
          
                
			#include<msp430x14x.h>
          #define uint unsigned int
          #define uchar unsigned char
          #define ulint unsigned long int
          #define RS BIT0;
          #define RW BIT1;
          #define EN BIT2;
          uint Volt0; //設置電壓變量
          ulint Volttem0;
          unsigned data0=0,data1=0;
          uint ADresult0; //設置A／Ｄ轉換結果
          uint a[10]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};//數碼管不帶小數點譯碼
          uint b[10]={0x40,0x79,0x24,0x30,0x19,0x12,0x02,0x78,0x00,0x10};//數碼管帶小數點譯碼
          uchar c[]={"voltage:"};
          uchar *fu="V",*dian=".";
          uchar num[]={"0123456789"}; //電壓值尋址
          int value[4]={0,0,0,0}; //存放電壓 (v/1000)
          int counter=0; //計數分時顯示
          void lcd_init(); //初始化LCD
          void lcd_wcmd(uchar cmd); //寫LCD指令
          void lcd_wdata(uchar data); //寫LCD數據
          void lcd_pos(uchar pos); //設置LCD顯示位置
          void LED_SH();
          void LCD_SH();
          void Adcvolt(void) //進行電壓轉換時ADC12的初始化
          {
           ADC12CTL0 &=~ENC; //ENC為低電平，設置AD控制寄存器
           ADC12CTL0 |=ADC12ON+MSC; //打開ADC12，可以進行AD轉換，參考電壓3.3V
           ADC12CTL1=CSTARTADD_0+CONSEQ_1+SHP;//單通道單次轉換，采樣頻率源自采樣定時器
           ADC12MCTL0=EOS+INCH_0; //選擇模擬輸入通道1
           ADC12IE |=BIT0; //AD轉換中斷允許
           ADC12CTL0 |=ENC; //轉換允許
           ADC12CTL0 |=ADC12SC; //開始AD轉換
          }
          void Delay(uint n) //延時函數
          {
           uint i,j;
           for(i=n;i>0;i--)
           for(j=100;j>0;j--) ;
          }
          void lcd_init() //初始化LCD
          {
           lcd_wcmd(0x38);//16*2顯示、5*7顯示、8位數據顯示
           Delay(1);
           lcd_wcmd(0x0c);//顯示開，關光標
           Delay(1);
           lcd_wcmd(0x06);//移動光標
           Delay(1);
           lcd_wcmd(0x01);//清除LCD現實的內容
           Delay(1);
          }
          void lcd_wcmd(uchar cmd) //LCD寫指令
          {
           P3OUT &=~RS;
           P3OUT &=~RW;
           P3OUT &=~EN;
           P4OUT=cmd;
           P3OUT |=EN;
           Delay(1);
           P3OUT &=~EN;
          }
          void lcd_pos(uchar pos) //設置顯示位置
          {
           lcd_wcmd(pos | 0x80);
          }
          void lcd_wdata(uchar data)//寫入數據到LCD
          {
           P3OUT |=RS;
           P3OUT &=~RW;
           P3OUT &=~EN;
           P4OUT = data;
           P3OUT |=EN;
           P3OUT &=~EN;
          }
          void LED_SH() //LED_show
          {
           P2OUT |=BIT1+BIT3+BIT4;
           P4OUT=0xff;
           P5OUT=0x01; //選擇第一位數碼管
           P4OUT=b[value[0]]; //P4口顯示采樣值的個位
           Delay(3);
           P4OUT=0xff;
           P5OUT=0x02; //選擇第二位數碼管
           P4OUT=a[value[1]];//P4口顯示采樣值的第一位小數
           Delay(3);
           P4OUT=0xff;
           P5OUT=0x04; //選擇第三位數碼管
           P4OUT=a[value[2]];//P4顯示采樣值的第二位小數
           Delay(3);
           P4OUT=0xff;
           P5OUT=0x08; //選擇第四位數碼管
           P4OUT=a[value[3]];//P4顯示采樣值的第三位小數
           Delay(3);
           P4OUT=0xff;
          }
          void LCD_SH() //LCD_show
          {
           uint i;
           P2OUT &=~(BIT1+BIT3+BIT4);//turn off 74HC573
           lcd_init(); //初始化LCD，以下為L(zhǎng)CD顯示部分
           Delay(1);
           lcd_wcmd(0x06); //光標右移
           lcd_pos(0); //設置顯示位置為第一行的第一個字符
           for(i=0;c[i]!=看屁屁www成人影院,亚洲人妻成人图片,亚洲精品成人午夜在线,日韩在线 欧美成人

(function(){
    var bp = document.createElement('script');
    var curProtocol = window.location.protocol.split(':')[0];
    if (curProtocol === 'https') {
        bp.src = 'https://zz.bdstatic.com/linksubmit/push.js';
    }
    else {
        bp.src = 'http://push.zhanzhang.baidu.com/push.js';
    }
    var s = document.getElementsByTagName("script")[0];
    s.parentNode.insertBefore(bp, s);
})();