<meter id="pryje"><nav id="pryje"><delect id="pryje"></delect></nav></meter>

<label id="pryje"></label>

新聞中心

EEPW首頁 > 嵌入式系統 > 設計應用 > 單片機驅動點陣16*16綜合C程序-包含各種效果

單片機驅動點陣16*16綜合C程序-包含各種效果

作者：時間：2016-11-29 來源：網絡

加入技術交流群
- 掃碼加入
  和技術大咖面對面交流
  海量資料庫查詢

收藏

一、硬件簡介：　經過努力，終于完成了我以前一直的夢想，點陣各種模式能獨立原創出點陣屏各種模式：間斷、上移、下移、左移、右移、上拉幕、下拉幕、左拉幕、右拉幕、左覆蓋、右覆蓋等等模式，我認為點陣只要是上移、左移會了，基本其它的都會了！一定要理解了，才算喲，太高興了，現在和大家分享下了，我的硬件是：行是譯碼器74HC154＋S8550，列是74HC595移位寄存器.

祥細視頻如下http://www.tudou.com/programs/view/D0SCJyO4RBQ/　
完整的程序源代碼下載：http://www.51hei.com/f/dz854.rar

本文引用地址：http://www.ex-cimer.com/article/201611/323390.htm

二、具體原理圖見

電路介紹：http://www.51hei.com/mcu/1523.html

三、具體程序代碼如下：

#include

#define uchar unsigned char

#define uint unsigned int

#define LINE P0//定義行線IO口，即74HC154控制端

#define shudu 12//字移動的速度

sbit DATA=P1^4;//74HC595數據端

sbit CLK=P1^5;//74HC595移位脈沖端

sbit CLKR=P1^6;//74HC595數據鎖存端

uchar move;//移動幾位變量

uchar line;//行變量

uint word;//字節變量

uchar ji,gai;//字節變量

uchar BUF[4];//4組緩存數組以便左移右移等功能動態更改數據

/************************************************************/

/**********上移上拉左移左拉左覆蓋數組************************/

/************************************************************/

uchar code table[]={

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x10,0x3F,0xF8,0x04,0x10,0x04,0x14,0xFF,0xFE,0x04,0x10,0x04,0x10,

0x3F,0xF0,0x04,0x10,0x04,0x00,0x08,0x00,0x08,0x00,0x10,0x00,0x20,0x00,0x40,0x00,

0x01,0x00,0x01,0x08,0x7F,0xFC,0x01,0x00,0x3F,0xF8,0x01,0x00,0xFF,0xFE,0x00,0x10,

0x1F,0xF8,0x10,0x10,0x1F,0xF0,0x10,0x10,0x1F,0xF0,0x10,0x10,0x10,0x50,0x10,0x20,

0x01,0x10,0xFF,0x90,0x14,0x50,0x14,0x7C,0x7F,0x50,0x55,0x90,0x55,0x10,0x57,0xFE,

0x61,0x04,0x41,0x7E,0x41,0x44,0x7F,0x44,0x41,0x44,0x41,0x44,0x7F,0x7C,0x41,0x44,

0x00,0x78,0x3F,0x80,0x11,0x10,0x09,0x20,0x7F,0xFE,0x42,0x02,0x82,0x04,0x7F,0xF8,

0x04,0x00,0x07,0xF0,0x0A,0x20,0x09,0x40,0x10,0x80,0x11,0x60,0x22,0x1C,0x0C,0x08,

0x04,0x40,0x04,0x44,0xFF,0xFE,0x04,0x40,0x08,0x7C,0x09,0x44,0x7F,0xC4,0x08,0x7C,

0x0A,0x44,0x3F,0x44,0x22,0x7C,0x22,0x44,0x22,0x44,0x3E,0x44,0x22,0x94,0x01,0x08,

0x08,0x20,0x08,0x24,0xFF,0xFE,0x08,0x20,0x01,0x08,0x3F,0xFC,0x20,0x08,0x20,0x08,

0x3F,0xF8,0x20,0x08,0x20,0x00,0x20,0x00,0x20,0x00,0x40,0x00,0x40,0x00,0x80,0x00,

0x08,0x10,0x08,0x10,0x08,0x10,0x10,0x20,0x10,0x20,0x22,0x44,0x7E,0xFC,0x04,0x08,

0x08,0x10,0x10,0x20,0x20,0x40,0x7E,0xFC,0x00,0x00,0x00,0x04,0xFF,0xFE,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00

};

/************************************************************/

/**********************下拉、下移數組************************/

/************************************************************/

uchar code table1[]={

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x08,0x10,0x08,0x10,0x08,0x10,0x10,0x20,0x10,0x20,0x22,0x44,0x7E,0xFC,0x04,0x08,

0x08,0x10,0x10,0x20,0x20,0x40,0x7E,0xFC,0x00,0x00,0x00,0x04,0xFF,0xFE,0x00,0x00,

0x08,0x20,0x08,0x24,0xFF,0xFE,0x08,0x20,0x01,0x08,0x3F,0xFC,0x20,0x08,0x20,0x08,

0x3F,0xF8,0x20,0x08,0x20,0x00,0x20,0x00,0x20,0x00,0x40,0x00,0x40,0x00,0x80,0x00,

0x04,0x40,0x04,0x44,0xFF,0xFE,0x04,0x40,0x08,0x7C,0x09,0x44,0x7F,0xC4,0x08,0x7C,

0x0A,0x44,0x3F,0x44,0x22,0x7C,0x22,0x44,0x22,0x44,0x3E,0x44,0x22,0x94,0x01,0x08,

0x00,0x78,0x3F,0x80,0x11,0x10,0x09,0x20,0x7F,0xFE,0x42,0x02,0x82,0x04,0x7F,0xF8,

0x04,0x00,0x07,0xF0,0x0A,0x20,0x09,0x40,0x10,0x80,0x11,0x60,0x22,0x1C,0x0C,0x08,

0x01,0x10,0xFF,0x90,0x14,0x50,0x14,0x7C,0x7F,0x50,0x55,0x90,0x55,0x10,0x57,0xFE,

0x61,0x04,0x41,0x7E,0x41,0x44,0x7F,0x44,0x41,0x44,0x41,0x44,0x7F,0x7C,0x41,0x44,

0x01,0x00,0x01,0x08,0x7F,0xFC,0x01,0x00,0x3F,0xF8,0x01,0x00,0xFF,0xFE,0x00,0x10,

0x1F,0xF8,0x10,0x10,0x1F,0xF0,0x10,0x10,0x1F,0xF0,0x10,0x10,0x10,0x50,0x10,0x20,

0x00,0x00,0x00,0x10,0x3F,0xF8,0x04,0x10,0x04,0x14,0xFF,0xFE,0x04,0x10,0x04,0x10,

0x3F,0xF0,0x04,0x10,0x04,0x00,0x08,0x00,0x08,0x00,0x10,0x00,0x20,0x00,0x40,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00

};

/************************************************************/

/*************************右覆蓋數組************************/

/************************************************************/

uchar code table2[]={

0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,

0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00

};

/************************************************************/

/*************************左覆蓋數組************************/

/************************************************************/

uchar code table3[]={

0x7f,0x3f,0x1f,0x0f,0x07,0x03,0x01,0x00,

0x7f,0x3f,0x1f,0x0f,0x07,0x03,0x01,0x00

};

/*****************************************/

/*****************延時子程序*************/

/***************************************/

void delay(uchar z)

{

uchar x,y;

for(x=2;x>0;x--)

for(y=z;y>0;y--);

}

/*****************************************/

/**************74HC595送數子程序********/

/***************************************/

void song(uchar z)//帶參數函數

{

uchar num,hang;//定義變量

hang=z;//將形參給變量

for(num=0;num<8;num++)//移動8次將數據發送完畢

{

if(hang&0x01==1)//將高7位屏蔽掉，保留最低位判斷

DATA=1;//為1就將74HC595數據端置1

else

DATA=0;//否則給0

CLK=0;//上升沿送走數據

CLK=1;//高電平形成上升沿

hang>>=1;//將數移走一位

}

}

/************************************************************/

/************************************************************/

/**************************間斷顯示***************************/

/************************************************************/

/************************************************************/

void jian()

{

while(word<128)//要顯示多少字？

{

for(move=150;move>0;move--)//字間斷顯示的速度

{

ji=word;

for(line=0;line<16;line++)

{

song(~table[ji*2+1]);//先右半屏

song(~table[ji*2]);//再左半屏

ji++;//下一行

CLKR=1;//在74HC595處鎖存起來

CLKR=0;

CLKR=1;

LINE=line;//打開列

delay(17);

}

}

word=ji;

}

}

/************************************************************/

/************************************************************/

/**************************上移顯示***************************/

/************************************************************/

/************************************************************/

void shang()

{

while(word<128)

{

for(move=20;move>0;move--)

{

ji=word;//將變量存起來

for(line=0;line<16;line++)

{

song(~table[ji*2+1]);

song(~table[ji*2]);

ji++;

CLKR=1;//在74HC595處鎖存起來

CLKR=0;

CLKR=1;

LINE=line;

delay(5);

}

}

word+=1;//數組數增加一行，形成上移

}

}

/************************************************************/

/************************************************************/

/**************************下移顯示***************************/

/************************************************************/

/************************************************************/

void xia()

{

while(word>1)

{

for(move=20;move>0;move--)

{

ji=word;//給倒數第2個字位置地址碼給ji變量

for(line=0;line<16;line++)

{

song(~table1[ji*2+1]);//發右半屏數　注意這是數組1的代碼

song(~table1[ji*2]);//發左半屏數

ji++;

CLKR=1;//在74HC595處鎖存起來

CLKR=0;

CLKR=1;

LINE=line;

delay(5);

}

}

word-=1;//數組數減1一行，形成下移

}

}

上一頁 1 2 3 下一頁

<a target='_blank'><img src='https://ad.eepw.com.cn/www/delivery/avw.php?zoneid=114&cb=INSERT_RANDOM_NUMBER_HERE&n=a7a83b30' border='0' alt='' /></a>
<a target='_blank'><img src='https://ad.eepw.com.cn/www/delivery/avw.php?zoneid=115&cb=INSERT_RANDOM_NUMBER_HERE&n=a3d98779' border='0' alt='' /></a>
<a target='_blank'><img src='https://ad.eepw.com.cn/www/delivery/avw.php?zoneid=116&cb=INSERT_RANDOM_NUMBER_HERE&n=abca108c' border='0' alt='' /></a>
<a target='_blank'><img src='https://ad.eepw.com.cn/www/delivery/avw.php?zoneid=117&cb=INSERT_RANDOM_NUMBER_HERE&n=a1775170' border='0' alt='' /></a>
<a target='_blank'><img src='https://ad.eepw.com.cn/www/delivery/avw.php?zoneid=118&cb=INSERT_RANDOM_NUMBER_HERE&n=a449048b' border='0' alt='' /></a>

關鍵詞： 單片機驅動點陣16*1

評論

相關推薦

無線電源傳輸器系統2

視頻 EEPW TI 電源技術 WPC1.1 | 2014-10-14

英特爾AI解決方案為最新Meta Llama 3.1模型提供加速

智能計算英特爾 AI解決方案 Meta Llama 3.1 | 2024-07-25

ADA4899-1 Unity Gain Stable, Ultralow Distortion, 1 nV√Hz Voltage Noise, High Speed Op Amp

資源下載 ADI 放大器 ADA4899-1 | 2007-02-09

IBM又一場IT革命：在中國推出“1.2.3”戰略

liujt_ic | 2003-02-25

高性能Sub-GHz無線電開發平臺

視頻 ADI 收發器 ADF7030-1 RF | 2017-04-01

1-Wire搜索算法

資源下載 1-Wire 搜索算法 | 2007-02-09

ADA4625-1：36V、18MHz、低噪聲、單電源、軌到軌輸出、JFET運算放大器

視頻 ADI 運算放大器 ADA4625-1 | 2018-12-03

百盛BS-2506-1型ATX開關電源(TL494) 電路

設計方案百盛 BS-2506-1 開關電源 TL494 電路 | 2009-07-06

AST MPX-1型彩色顯示器的電源電路圖

設計方案 MPX-1 彩色顯示器電源電路圖 | 2009-07-06

臺積電準備迎接“Angstrom 14 時代”啟動尖端1.4納米工藝研發

EDA/PCB 臺積電 Angstrom 14 1.4納米工藝 | 2024-04-26

Meta 展示新款 MTIA 芯片：5nm 工藝、90W 功耗、1.35GHz

EDA/PCB Meta MTIA 芯片 5nm 工藝 90W 功耗 1.35GHz | 2024-04-15

DK1.1馬上出爐了。

powercxz | 2003-01-09

實測藍牙Mesh 1.1性能更新深入理解并徹底優化

手機與無線通信 Silicon Labs 藍牙Mesh 1.1 | 2024-07-22

嵌入式圖形界面GUI-1，需要的請排隊！

jackwang | 2002-05-21

HDMI 1.3規范

資源下載 High-Definition Multimedia Interface HDMI 1.3規范 | 2007-12-20

聯通國脈共投資1.54億轉攻數字集群通信

liujt_ic | 2002-11-28

NEC JC-1404HMN-1型多頻TTL和VGA大屏幕彩色顯示器的電源電路圖

設計方案 JC-1404HMN-1 多頻大屏幕彩色顯示器電源 | 2009-07-06

過程控制演示

視頻 ADI DAC AD5755-1 | 2012-06-18

三星 AI 推理芯片 Mach-1 即將原型試產，有望基于 4nm 工藝

EDA/PCB 三星 AI Mach-1 原型試產 4nm 工藝 | 2024-05-10

KJZ2-1單相調功板電原理圖

設計方案 KJZ2-1 單相調功板電原理 | 2009-07-06

AST-1型彩色顯示器的電源電路圖

設計方案 AST-1 彩色顯示器電源電路圖 | 2009-07-06

Intel 14A工藝至關重要！2025年之后穩定領先

EDA/PCB 英特爾晶圓芯片先進制程 1.4nm | 2024-05-11

三星電子重申 SF1.4 工藝有望于 2027 年量產，計劃進軍共封裝光學領域

EDA/PCB 三星 1.4nm 晶圓代工 | 2024-06-13

研華發布RK3588 SMARC 2.1核心模塊ROM-6881助力機器視覺應用智能升級

工控自動化研華 RK3588 SMARC 2.1 ROM-6881 機器視覺 | 2024-06-18

使用ADF7030-1演示超低功耗6LoWPan無線傳感器

視頻 adi ADF7030-1 6LoWPan無線傳感器 | 2016-11-10

大聯大友尚集團推出基于ST產品的140W USB PD3.1快充方案

電源與新能源友尚集團 ST 140W USB PD3.1 快充方案 | 2024-07-18

IEEE 1149.1-2001 技術規范

資源下載 IEEE 標準規范 IEEE 1149.1-2001 | 2008-01-06

觸摸屏軟件開發系統2.3.1

資源下載觸摸屏軟件系統 2.3.1 | 2007-02-09

大聯大詮鼎集團推出基于立锜科技產品的240W PD3.1快充方案

電源與新能源大聯大詮鼎立锜 PD3.1 快充 | 2024-04-18

臺灣明年1.7億臺幣推自由軟件倡議兩岸合作中文化

hpnet | 2002-12-23

焦點

推薦視頻

技術專區

看屁屁www成人影院,亚洲人妻成人图片,亚洲精品成人午夜在线,日韩在线欧美成人 (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();