51單片機做的溫濕度測量?jī)x 作者： 時間：2016-11-29 來源：網絡 加入技術交流群 掃碼加入和技術大咖面對面交流海量資料庫查詢 收藏 <a target='_blank'><img src='https://ad.eepw.com.cn/www/delivery/avw.php?zoneid=88&cb=INSERT_RANDOM_NUMBER_HERE&n=a635e61e' border='0' alt='' /></a> <a target='_blank'><img src='https://ad.eepw.com.cn/www/delivery/avw.php?zoneid=87&cb=INSERT_RANDOM_NUMBER_HERE&n=a576c0a2' border='0' alt='' /></a> void lcdwrcom(uchar cdat)//寫指令數據到LCD { cdat = ((cdat&0x01)<<7)|((cdat&0x02)<<5)|((cdat&0x04)<<3)|((cdat&0x08)<<1)|((cdat&0x10)>>1)|((cdat&0x20)>>3)|((cdat&0x40)>>5)|((cdat&0x80)>>7);rs=0;//寫指令時RS拉低en=1;P0=cdat;//delayms(6);//不加此延時將導致不能寫入指令，但能寫入顯示數據en=0;delayms(6);}void lcd_init(){lcdwrcom(0x38); //0x38設置顯示模式為:16X2顯示,5X7點陣,8位數據接口lcdwrcom(0x0c); //打開顯示光標閃爍lcdwrcom(0x06); //lcdwrcom(0x01); //}void display(float temp,float humi) //1602顯示函數(溫度,濕度){uint a,b,c,d,e,f,g,h;a=(temp/1000);b=((temp-a*1000)/100);c=((temp-a*1000-b*100)/10);d=(temp-a*1000-b*100-c*10);e=(humi/1000);f=((humi-e*1000)/100);g=((humi-e*1000-f*100)/10);h=(humi-e*1000-f*100-g*10);lcdwrcom(0x80+0x07);lcdwrdata(0+a);lcdwrcom(0x80+0x08);lcdwrdata(0+b);lcdwrcom(0x80+0x09);lcdwrdata(.) ;lcdwrcom(0x80+0x0A);lcdwrdata(0+c);lcdwrcom(0x80+0x0B);lcdwrdata(0+d);lcdwrcom(0x80+0x47);lcdwrdata(0+e);lcdwrcom(0x80+0x48);lcdwrdata(0+f);lcdwrcom(0x80+0x49);lcdwrdata(.) ;lcdwrcom(0x80+0x4A);lcdwrdata(0+g);lcdwrcom(0x80+0x4B);lcdwrdata(0+h);}float calc_temp(uint tempvalue) //計算溫度值子函數 { const float d1=-39.9;const float d2=+0.01;float temp_final;tempvalue=tempvalue&0x3fff; //取出低 14 位temp_final=d1+d2*((float)tempvalue);return temp_final; //返回溫度值}//計算濕度值子函數 float calc_humi(float humivalue) { const float c1=-4.0,c2=0.0405,c3=-0.0000028,t1=0.01,t2=0.00008; float rh=humivalue; float rhlin; float rhtrue; rhlin=c1+c2*rh+c3*rh*rh; rhtrue=(27.87-25)*(t1+t2*rh)+rhlin; if(rhtrue>100) rhtrue=100; if(rhtrue<0.1) rhtrue=0.1; humivalue=rhtrue; return humivalue;}void main() { uint i; //定義計數器uint value1; //定義傳感器傳出來的數值(16位)uint value2; //定義傳感器傳出來的數值(16位)float dis_tempvalue; //定義溫度變量float dis_humivalue; //定義濕度變量//以下是初始化液晶操作rw=0;delayms(200);en=0;lcd_init();//以下是液晶固定顯示lcdwrcom(0x80+0x00); //第1行00位置for(i=0;i<7;i++){lcdwrdata(table_temp[i]);}lcdwrcom(0x80+0x0C); //第1行0C位置for(i=0;i<4;i++){lcdwrdata(table_c[i]);}lcdwrcom(0x80+0x40); //第2行40位置for(i=0;i<7;i++){lcdwrdata(table_humi[i]);}lcdwrcom(0x80+0x4C); //第2行4C位置for(i=0;i<4;i++){lcdwrdata(table_p[i]);}//while(1) { connectionreset(); error=0; value1=measure1(); value2=measure2(); if(error==0) { led1=0; delayms(200); led1=1; delayms(200);dis_tempvalue=calc_temp(value1); //計算溫度值dis_humivalue=calc_humi(value2); //計算濕度值display(dis_tempvalue*100,dis_humivalue*100); //LCD1602顯示溫濕度} else { continue; } } } 上一頁 1 2 3 下一頁
加入技術交流群
評論