玩轉LED點陣之二:16X64單紅點陣左移

//晶振：22.1184M,下載選擇雙倍時鐘，否則會有閃爍！
//顯示屏：HUB08接口16X64單紅點陣
//顯示方式：左移
//作者：振甬電子
//QQ: 1766135164
//網址：www.51hei.com
//時間：2013-05-13

#include
#include"zimo.h"
#define ucharunsigned char
#define uintunsigned int
#define SPEED5//定義速度與數字成反比 數字小，速度快
#define NUMBER11//定義要移動顯示總16X16漢字個數,計算方法：NUMBER=漢字顯示個數+4個空格

uchar word=0,col=0,col1=0,disrow=0,move=0;//wor為要顯字變量，col為位移變量,col1為字節偏移量,disrow為行變量
uchar BUFF__UP[17];//緩沖字節數取值=[2*板點陣寬度/8]+1比較保險,即兩倍板的點陣字節數.
uchar BUFF__UP0[12];//上半屏顯示緩沖

sbit R1=P0^4;//紅色數據1
sbit R2=P3^3;//紅色數據2
sbit G1=P3^4;//綠色數據1
sbit G2=P3^5;//綠色數據
sbit CLK=P0^7; //595時鐘端口
sbit STB=P0^6; //595鎖存端口
sbit OE =P0^5;//74HC138使能：低有效

//根據列指針由雙字節合并為單字節的子程序模塊
//和點陣的取模方式有關:低位在前，高位在后，但是實際顯示，高位在前，低位在后!
uchar Combine_2byte(uchar h1,uchar h2)
{
uchar T_date,tempcol;
tempcol=col1;
T_date=(h1>>tempcol)|(h2<<(8-tempcol));
return T_date;
}

//分別裝屏點陣數據
void Load_one_line(void)//多加4個16X16漢字的緩沖
{
BUFF__UP[0]=Table[word][disrow*2+0];//裝載點陣數據
BUFF__UP[1]=Table[word][disrow*2+1];

BUFF__UP[2]=Table[word+1][disrow*2+0];
BUFF__UP[3]=Table[word+1][disrow*2+1];

BUFF__UP[4]=Table[word+2][disrow*2+0];
BUFF__UP[5]=Table[word+2][disrow*2+1];

BUFF__UP[6]=Table[word+3][disrow*2+0];
BUFF__UP[7]=Table[word+3][disrow*2+1];

BUFF__UP[8]=Table[word+4][disrow*2+0];
BUFF__UP[9]=Table[word+4][disrow*2+1];

BUFF__UP[10]=Table[word+5][disrow*2+0];
BUFF__UP[11]=Table[word+5][disrow*2+1];

BUFF__UP[12]=Table[word+6][disrow*2+0];
BUFF__UP[13]=Table[word+6][disrow*2+1];

BUFF__UP[14]=Table[word+7][disrow*2+0];
BUFF__UP[15]=Table[word+7][disrow*2+1];

}

//發送屏一線點陣數據
void Send_one_line(void)
{
char s;
uchar temp,i,inc;
if(col<8)inc=0;
if(8<=col&&col<16)inc=1;
for(s=0+inc;s<=8+inc;s++)
{
temp=Combine_2byte(BUFF__UP[s],BUFF__UP[s+1]);
for(i=0;i<8;i++)
{
R1=~(temp>>i)&0x01;//取出最低位
R2=0xff;//不顯示
G1=0xff;
G2=0xff;
CLK=0;
CLK=1;//移位時鐘
}
}
}

//左移函數
void LEFT_MOVE()
{
uchar i;
for(col=0;col<16;col++)//循環16次，點亮并移動一個漢字，步進是一位
{
col1=col%8;//一個字節移動位數
for(i=0;i
{
for(disrow=0;disrow<16;disrow++)//掃描16行
{
Load_one_line();//裝載一行點陣數據
Send_one_line();//發送一行點陣數據
OE=1;
STB=1;// 輸出鎖存
STB=0;
P0=disrow;// 行掃描
OE=0;
}
}
}

word=word+1;// 一個漢字移動后，指向下一個漢字
if(word>=NUMBER)
{
word=0;//移動完NUMBER個漢字后重新開始
}
}

//主函數入口
void main(void)
{
R1=0;//數據初始化
R2=0;
G1=0;
G2=0;
while(1)
{
LEFT_MOVE(); //左移
}
}

zimo.h

unsigned char code Table[][32]=
{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//空白
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,