128*64代碼進化版顯示時，分，秒

0x00,0x40,0x40,0x20,0xB2,0xA0,0x96,0x90,0x9A,0x4C,0x92,0x47,0xF6,0x2A,0x9A,0x2A,
0x93,0x12,0x91,0x1A,0x99,0x26,0x97,0x22,0x91,0x40,0x90,0xC0,0x30,0x40,0x00,0x00,/*"愛",1*/

0x00,0x08,0x00,0x08,0xF8,0x0B,0x28,0x09,0x29,0x09,0x2E,0x09,0x2A,0x09,0xF8,0xFF,
0x28,0x09,0x2C,0x09,0x2B,0x09,0x2A,0x09,0xF8,0x0B,0x00,0x08,0x00,0x08,0x00,0x00,/*"單",2*/

0x00,0x80,0x00,0x40,0x00,0x30,0xFE,0x0F,0x10,0x01,0x10,0x01,0x10,0x01,0x10,0x01,
0x10,0x01,0x1F,0x01,0x10,0x01,0x10,0xFF,0x10,0x00,0x18,0x00,0x10,0x00,0x00,0x00,/*"片",3*/

0x08,0x04,0x08,0x03,0xC8,0x00,0xFF,0xFF,0x48,0x00,0x88,0x41,0x08,0x30,0x00,0x0C,
0xFE,0x03,0x02,0x00,0x02,0x00,0x02,0x00,0xFE,0x3F,0x00,0x40,0x00,0x78,0x00,0x00, /*機",4*/

0x00,0x00,0xFC,0x07,0x44,0x04,0x44,0x04,0x44,0x04,0xFC,0x07,0x10,0x00,0x90,0x00,
0x10,0x03,0x10,0x40,0x10,0x80,0xFF,0x7F,0x10,0x00,0x10,0x00,0x10,0x00,0x00,0x00,/*"時",0*/

0x80,0x00,0x40,0x80,0x20,0x40,0x98,0x20,0x87,0x10,0x82,0x0F,0x80,0x00,0x80,0x00,
0x83,0x20,0x84,0x40,0x98,0x3F,0x30,0x00,0x60,0x00,0xC0,0x00,0x40,0x00,0x00,0x00,/*"分",1*/

0x12,0x04,0x12,0x03,0xD2,0x00,0xFE,0xFF,0x91,0x00,0x11,0x83,0xC0,0x80,0x38,0x40,
0x10,0x40,0x00,0x20,0xFF,0x23,0x00,0x10,0x08,0x08,0x10,0x04,0x60,0x03,0x00,0x00};/*"秒",2*/
//------------------------------數字字摸----------------------------------
uchar code asc[]={
0x00,0x00,0xE0,0x0F,0x10,0x10,0x08,0x20,0x08,0x20,0x10,0x10,0xE0,0x0F,0x00,0x00,/*"0",0*/

0x00,0x00,0x10,0x20,0x10,0x20,0xF8,0x3F,0x00,0x20,0x00,0x20,0x00,0x00,0x00,0x00,/*"1",1*/

0x00,0x00,0x70,0x30,0x08,0x28,0x08,0x24,0x08,0x22,0x88,0x21,0x70,0x30,0x00,0x00,/*"2",2*/

0x00,0x00,0x30,0x18,0x08,0x20,0x88,0x20,0x88,0x20,0x48,0x11,0x30,0x0E,0x00,0x00,/*"3",3*/

0x00,0x00,0x00,0x07,0xC0,0x04,0x20,0x24,0x10,0x24,0xF8,0x3F,0x00,0x24,0x00,0x00,/*"4",4*/

0x00,0x00,0xF8,0x19,0x08,0x21,0x88,0x20,0x88,0x20,0x08,0x11,0x08,0x0E,0x00,0x00,/*"5",5*/

0x00,0x00,0xE0,0x0F,0x10,0x11,0x88,0x20,0x88,0x20,0x18,0x11,0x00,0x0E,0x00,0x00,/*"6",6*/

0x00,0x00,0x38,0x00,0x08,0x00,0x08,0x3F,0xC8,0x00,0x38,0x00,0x08,0x00,0x00,0x00,/*"7",7*/

0x00,0x00,0x70,0x1C,0x88,0x22,0x08,0x21,0x08,0x21,0x88,0x22,0x70,0x1C,0x00,0x00,/*"8",8*/

0x00,0x00,0xE0,0x00,0x10,0x31,0x08,0x22,0x08,0x22,0x10,0x11,0xE0,0x0F,0x00,0x00,/*"9",9*/

0x00,0x00,0xE0,0x0F,0x10,0x10,0x08,0x20,0x08,0x20,0x10,0x10,0xE0,0x0F,0x00,0x00};/*"0",10*/

//------------------------------庫函數---------------------------

void delay(unsigned long v) //延時子函數
{
while(v--);
}

void lcd_busy() //繁忙標志
{
rs=0;
rw=1;
dataport=0xff;
while(1)
{
en=1;
if(dataport<0x80)break;
en=0;
}
en=0;
}

void wcode(uchar c,uchar csl,uchar csr)//寫指令
{
CS1=csl;
CS2=csr;
lcd_busy();
rs=0;
rw=0;
dataport=c;
en=1;
en=0;
}

void wdata(uchar c,uchar csl,uchar csr) //寫數據
{
CS1=csl;
CS2=csr;
lcd_busy();
rs=1;
rw=0;
dataport=c;
en=1;
en=0;
}

void lw(uchar x,uchar y,uchar dd) //寫一個字節(jié)進芯片
{
if(x>=64)
{
set_xy(x-64,y);
wdata(dd,0,1);
}
else
{
set_xy(x,y);
wdata(dd,1,0);
}
}
void set_startline(uchar i) //設定起始行
{
i=0xc0+i;
wcode(i,1,1);
}

void set_xy(uchar x,uchar y) //定位x,y位置
{
x=x+0x40;
y=y+0xb8;
wcode(x,1,1);
wcode(y,1,1);
}

void dison_off(uchar k) //開，關顯示
{
k=k+0x3e;
wcode(k,1,1);
}

void reset()
{
RST=0;
delay(40);
RST=1;
delay(40);
}

void lcd_init(void) //芯片初始化
{uchar x,y;
reset();
set_startline(0);
dison_off(0);
for(y=0;y<8;y++)
{
for(x=0;x<128;x++)lw(x,y,0);
}
dison_off(1);
}

void display_hz(uchar xx, uchar yy, uchar n, uchar fb) //顯示漢字逐列式
{
uchar i,dx;
for(i=0;i<16;i++)
{dx=hz[2*i+n*32];
if(fb)dx=255-dx;
lw(xx*8+i,yy,dx);
dx=hz[(2*i+1)+n*32];
if(fb)dx=255-dx;
lw(xx*8+i,yy+1,dx);
}
}

void display_asc(uchar xx,uchar yy,uchar n,uchar fb) //顯示數字逐列式
{
uchar i,dx;
for(i=0;i<8;i++)
{
dx=asc[2*i+n*16];
if(fb)dx=255-dx;
lw(xx*8+i,yy,dx);
dx=asc[2*i+1+n*16];
if(fb)dx=255-dx;
lw(xx*8+i,yy+1,dx);
}
}