不帶使能端的3線8線譯碼器VHDL程序

LIBRARY IEEE;

USE IEEE.STD_LOGIC_1164.ALL;

ENTITY LS138 IS

PORT ( S:in STD_LOGIC_vector(2 downto 0);

Y: out STD_LOGIC_vector(7 downto 0));

end LS138;

ARCHITECTURE mux_behave OF LS138 IS

begin

PROCESS(S) IS

BEGIN

CASE S IS

when "000"=>Y<=(0=>0,OTHERS=>1);

when "001"=>Y<=(1=>0,OTHERS=>1);

when "010"=>Y<=(2=>0,OTHERS=>1);

when "011"=>Y<=(3=>0,OTHERS=>1);

when "100"=>Y<=(4=>0,OTHERS=>1);

when "101"=>Y<=(5=>0,OTHERS=>1);

when "110"=>Y<=(6=>0,OTHERS=>1);

when "111"=>Y<=(7=>0,OTHERS=>1);

END CASE;

END PROCESS;

end mux_behave;

2。用公式

LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
ENTITY yimaqi138 IS
PORT (A,B,C:IN STD_LOGIC;
S1,notS2,notS3:IN STD_LOGIC;
Y0,Y1,Y2,Y3: out STD_LOGIC;
Y4,Y5,Y6,Y7: OUT STD_LOGIC);
End yimaqi138;
ARCHITECTURE mux_behave OF yimaqi138 IS
SIGNAL S:STD_LOGIC;
BEGIN
S<=S1 AND (NOT notS2) AND (NOT notS3);
Y0<=NOT(((NOT A)AND(NOT B)AND (NOT C)) AND S);
Y1<=NOT(((NOT A)AND (NOT B) AND C)AND S);
Y2<=NOT(((NOT A) AND B AND (not C))AND S);
Y3<=NOT(((NOT A) AND B AND C )AND S);
Y4<=NOT((A AND(NOT B)AND (NOT C))AND S);
Y5<=NOT((A AND (NOT B) AND C)AND S);
Y6<=NOT((A AND B AND (not C))AND S);
Y7<=NOT((A AND B AND C )AND S);
end mux_behave;