H-Jtag V1.0 燒寫NOR Flash
1. 打開H-Jtag-Server
本文引用地址:http://www.ex-cimer.com/article/201809/389134.htmInit->load,選擇初始化腳本“FriendlyARM2440.his”->打開
2. 菜單中選擇“Settting”->USB/LPT Selectiojn,選擇 LPT
3. 菜單中選擇“Settting”->LPT JTAG Setting,做如下設置
4. 菜單中選擇“Control”->LPT JTAG Setting
評論