<meter id="pryje"><nav id="pryje"><delect id="pryje"></delect></nav></meter>
          <label id="pryje"></label>

          新聞中心

          EEPW首頁 > 電源與新能源 > 設計應用 > PowerintTOP270VG100W小型反激電源解決方案

          PowerintTOP270VG100W小型反激電源解決方案

          作者: 時間:2012-08-28 來源:網絡 收藏
          Powerint公司的TOPSwitch-JX系列產品集成了725V功率MOSFET,高壓開關電流源,多模式PWM控制器,振蕩器,熱關斷電路,故障保護和其它控制電路,適合用于10W-245W的電源.265VAC時無負載的功耗小于100mW,主要用在筆記本電腦適配器,打印機,LCD監視器,STB,PC或LCD TV待機電源,音頻放大器.本文介紹了TOPSwitch-JX系列產品亮點,方框圖, 19V 65W反激電源電路圖和12V 30W反激電源電路圖以及12V/24V 100W反激電源評估板主要特性和指標,電路圖,變壓器電路圖與材料清單,PCB布局圖.

          TOPSwitch-JX cost effectively incorporates a 725 V power MOSFET, high-voltage switched current source, multi-mode PWM control, oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic device.

          TOPSwitch-JX系列產品亮點:

          EcoSmart – Energy Effi cient

          ? Ideal for applications from 10 W to 245 W

          ? Energy efficient over entire load range

          ? No-load consumption below 100 mW at 265 VAC

          ? Up to 750 mW standby output power for 1 W input at 230 VAC

          High Design Flexibility for Low System Cost

          ? Multi-mode PWM control maximizes effi ciency at all loads

          ? 132 kHz operation reduces transformer and power supply size

          ? 66 kHz option for highest effi ciency requirements

          ? Accurate programmable current limit

          ? Optimized line feed-forward for line ripple rejection

          ? Frequency jittering reduces EMI fi lter cost

          ? Fully integrated soft-start for minimum start-up stress

          ? 725 V rated MOSFET

          ? Simplifi es meeting design derating requirements

          Extensive Protection Features

          ? Auto-restart limits power delivery to 3% during overload faults

          ? Output short-circuit protection (SCP)

          ? Output over-current protection (OCP)

          ? Output overload protection (OPP)

          ? Output overvoltage protection (OVP)

          ? User programmable for hysteretic/latching shutdown

          ? Simple fast AC reset

          ? Primary or secondary sensed

          ? Line undervoltage (UV) detection prevents turn-off glitches

          ? Line overvoltage (OV) shutdown extends line surge withstand

          ? Accurate thermal shutdown with large hysteresis (OTP)

          Advanced Package Options

          ? eDIP?-12 package:

          ? 43 W / 117 W universal input power output capability with

          PCB / metal heat sink

          ? Low profi le horizontal orientation for ultra-slim designs

          ? Heat transfer to both PCB and heat sink

          ? Optional external heat sink provides thermal impedance

          equivalent to a TO-220

          ? eSIP?-7C package:

          ? 177 W universal input output power capability

          ? Vertical orientation for minimum PCB footprint

          ? Simple heat sink mounting using clip provides thermal

          impedance equivalent to a TO-220

          ? eSOP?-12 package:

          ? 66 W universal input output power capability

          ? Low profi le surface mounted for ultra-slim designs

          ? Heat transfer to PCB via exposed pad and SOURCE pins

          ? Supports wave or refl ow soldering

          ? Extended creepage to DRAIN pin

          ? Heat sink is connected to SOURCE for low EMI

          TOPSwitch-JX系列典型應用:

          ? Notebook or laptop adapter

          ? Generic adapter

          ? Printer

          ? LCD monitor

          ? Set-top box

          ? PC or LCD TV standby

          ? Audio amplifi er

          圖1.TOPSwitch-JX系列方框圖

          圖2.TOPSwitch-JX系列通用輸入19V 65W反激電源電路圖

          圖3.TOPSwitch-JX系列通用輸入12V 30W反激電源電路圖

          12V/24V 100W反激電源評估板

          This document is an engineering report describing a 12 V / 24 V, 100 W flyback DC-DC converter utilizing a TOP270VG from the TOPSwitch-JX family of ICs. This power supply is intended for use in an LCD TV with LED back light. The board requires +380 VDC input, supplied from the PFC stage in a typical TV design.

          100W反激電源評估板主要特性:

          ? Highly energy efficient

          ? Full load efficiency >90%

          ? Efficiency >89% above 10% load

          ? Average efficiency >90% (25%, 50%, 75%, 100% load points)

          ? Simplifies meeting ENERGY STAR 2.0 and EuP requirements

          ? Low cost, low component count and small PCB footprint solution

          ? Performance met without synchronous output rectification
          ? 132 kHz operation optimized core size and efficiency performance

          ? Low profile eDIP?-12 package for ultra-slim designs

          ? Integrated protection and reliability features

          ? Line under voltage lock out (UVLO)

          ? Primary sensed output overvoltage shutdown (OVP). Latched OVP condition can be reset with a fast AC reset circuit.

          ? Auto recovery output over current (OCP)

          ? Meets limited power source (LPS) 100 VA requirement with a single point of failure

          ? Accurate thermal shutdown with large hysteresis

          圖4.100W反激電源評估板外形圖
          100W反激電源主要指標:


          圖5.100W反激電源評估板電路圖
          100W反激電源評估板材料清單(BOM):




          圖6.100W反激電源評估板PCB布局圖(頂層)

          圖7.100W反激電源評估板PCB布局圖(底層)

          圖8.變壓器電路圖
          詳情請見:
          http://www.powerint.com/sites/default/files/product-docs/topjx_family_datasheet.pdf

          http://www.powerint.com/sites/default/files/PDFFiles/der299.pdf

          pwm相關文章:pwm是什么


          電路圖符號相關文章:電路圖符號大全




          評論


          相關推薦

          技術專區

          關閉
          看屁屁www成人影院,亚洲人妻成人图片,亚洲精品成人午夜在线,日韩在线 欧美成人 (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();