<meter id="pryje"><nav id="pryje"><delect id="pryje"></delect></nav></meter>
          <label id="pryje"></label>

          新聞中心

          EEPW首頁 > 手機與無線通信 > 設計應用 > NXP MFRC522 13.56 MHz RFID無接觸讀寫方案

          NXP MFRC522 13.56 MHz RFID無接觸讀寫方案

          作者: 時間:2011-02-05 來源:網絡 收藏
          NXP公司的MFRC522 是13.56 MHz 無接觸通信的高度集成的讀/寫IC,支持ISO/IEC 14443 A/MIFARE模式,兩個方向的傳輸速率高達848 kBd. MFRC522工作電壓2.5V到3.3V,提供SPI,串行UART和I2C總線接口,具有CRC協處理器和可編程I/O引腳,內部有自測試.本文介紹MFRC522主要特性, 簡化和詳細方框圖, 讀/寫模式, 總線接口圖以及典型應用方框圖.

          MFRC522: Contactless reader IC

          The MFRC522 is a highly integrated reader/writer IC for contactless communication at 13.56 MHz. The MFRC522 reader supports ISO/IEC 14443 A/MIFARE mode.The MFRC522’s internal transmitter is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443 A/MIFARE cards and transponders without additional active circuitry. The receiver module provides a robust and efficient implementation for demodulating and decoding signals from ISO/IEC 14443 A/MIFARE compatible cards and transponders. The digital module manages the complete ISO/IEC 14443 A framing and error detection (parity and CRC) functionality.

          The MFRC522 supports MF1xxS20, MF1xxS70 and MF1xxS50 products. The MFRC522 supports contactless communication and uses MIFARE higher transfer speeds up to 848 kBd in both directions.

          The following host interfaces are provided:

          ? Serial Peripheral Interface (SPI)

          ? Serial UART (similar to RS232 with voltage levels dependant on pin voltage supply)

          ? I2C-bus interface

          MFRC522主要特性:

          Highly integrated analog circuitry to demodulate and decode responses

          Buffered output drivers for connecting an antenna with the minimum number of external components

          Supports ISO/IEC 14443 A/MIFARE

          Typical operating distance in Read/Write mode up to 50 mm depending on the antenna size and tuning

          Supports MF1xxS20, MF1xxS70 and MF1xxS50 encryption in Read/Write mode

          Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd

          Supports MFIN/MFOUT

          Additional internal power supply to the smart card IC connected via MFIN/MFOUT

          Supported host interfaces

          SPI up to 10 Mbit/s

          I2C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode

          RS232 Serial UART up to 1228.8 kBd, with voltage levels dependant on pin voltage supply

          FIFO buffer handles 64 byte send and receive

          Flexible interrupt modes

          Hard reset with low power function

          Power-down by software mode

          Programmable timer

          Internal oscillator for connection to 27.12 MHz quartz crystal

          2.5 V to 3.3 V power supply

          CRC coprocessor

          Programmable I/O pins

          Internal self-test


          圖1.MFRC522簡化方框圖

          圖2.MFRC522詳細方框圖

          圖3.MFRC522讀/寫模式

          圖4.MFRC522 I2C總線接口圖

          圖5.MFIN和MFOUT信號路經圖

          圖6.MFRC522典型應用方框圖

          詳情請見:
          http://www.nxp.com/acrobat_download/datasheets/MFRC522_33.pdf

          物聯網相關文章:物聯網是什么




          評論


          相關推薦

          技術專區

          關閉
          看屁屁www成人影院,亚洲人妻成人图片,亚洲精品成人午夜在线,日韩在线 欧美成人 (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();