Atmel AT86RF233單片2.4GHz無線收發解決方案

作者：時間：2012-10-22 來源：網絡

加入技術交流群
- 掃碼加入
  和技術大咖面對面交流
  海量資料庫查詢

- Only two microcontroller GPIO lines necessary

- One interrupt pin from radio transceiver

- Clock output with prescaler from radio transceiver

• Radio transceiver features:

- 128-byte FIFO (SRAM) for data buffering

- Fully integrated, fast settling PLL to support Frequency Hopping

- Supports 500kHz channel spacing

- Battery monitor

- Fast Wake-Up Time 0.4msec

• Special IEEE 802.15.4™-2011 hardware support:

- FCS computation and Clear Channel Assessment

- RSSI measurement, Energy Detection and Link Quality Indication

• MAC hardware accelerator:

- Automated acknowledgement, CSMA-CA and retransmission

- Automatic address filtering

- Automated FCS check

• Extended feature set hardware support:

- AES 128-bit hardware accelerator

- Antenna Diversity and RX/TX indication

- Supported PSDU data rates: 250kb/s, 500kb/s, 1000kb/s and 2000kb/s

- True Random Number Generation for security application

- Reduced Power Consumption modes (patent pending)

• Industrial temperature range:

- -40℃ to +85℃

• I/O and packages:

- 32-pin Low-Profile QFN Package 5 x 5 x 0.9mm³

- RoHS/Fully Green

• Compliant to IEEE 802.15.4-2003/2006/2011

• Compliant to EN 300 328/440, FCC-CFR-47 Part 15, ARIB STD-66, RSS-210

圖1.AT86RF233方框圖

圖2.AT86RF233基本應用電路圖

圖3.AT86RF233擴展特性應用電路圖

評估板REB233SMAD

This manual describes the REB233SMAD radio extender board supporting antenna diversity in combination with the Atmel AT86RF233 radio transceiver.

Detailed information is given in the individual sections about the board functionality, the board interfaces, and the board design.

The REB233SMAD connects directly to the REB controller base board (REB-CBB),

or can be used as an RF interface in combination with one of the Atmel microcontroller development platforms. The REB233SMAD together with a microcontroller forms a fully functional wireless node.

The REB233SMAD-EK demonstrates the unique performance and rich feature set of the 2.4GHz RF transceiver AT86RF233 combined with the leading edge ATxmega256A3 microcontroller. The REB233SMAD-EK contains two sets of Radio Extender Board(REB), Controller Base Board (REB-CBB) and USB cable to enable PC connectivity.

The REB is assembled with an AT86RF233 and two SMA antennas, demonstrating the unrivaled hardware based Antenna Diversity feature to improve radio link robustness in adverse RF environments. The REB connected to the REB-CBB forms a fully functional, battery powered wireless node.

The kit is supported by Atmel BitCloud stack - a ZigBee PRO certified platform - and Atmel BitCloud Profile Suite - a certified testing and development solution for public application profiles like ZigBee Smart Energy and Home Automation. The kit is thus an ideal platform for design and prototyping of ZigBee-compliant wireless applications. The REB-CBB boards are also equipped with serial DataFlash, which enable