基于TOP265EG設計的30W待機電源方案
英飛凌汽車電子生態(tài)圈
圖2.TOPSwitch-JX系列通用輸入高效19V 65W反激電源電路圖
采用TOPSwitch-JX系列TOP265EG的12V 30W高效待機電源設計案例
12V 30W設計案例主要特性:
Highly energy efficient
Full load efficiency >90%
Efficiency >87% above 10% load
Average efficiency >90% (25%, 50%, 75%, 100% load points)
No-load input power 100 mW
Simplifies meeting ENERGY STAR 2.0, 80 Plus and EuP requirements
725 V MOSFET rating allowed high turns ratio (VOR) and use of 60 V Schottky output diode
Low cost, low component count and small PCB footprint solution
Performance met without synchronous output rectification
132 kHz operation optimized core size and efficiency performance
Low-profile eSIP package
Integrated Protection and Reliability Features
Line under-voltage lock out (UVLO)
Primary sensed latching output overvoltage shutdown (OVP) with fast AC reset
Auto recovery output over current (OCP)
Meets limited power source (LPS) 100 VA requirement with a single point of failure
Accurate thermal shutdown with large hysteresis
圖3.設計案例PCB外形圖(2.97 x 2.14 ).
設計電源指標:
圖4. 12V 30W設計案例電路圖
設計案例材料清單:
圖5. 12V 30W設計案例變壓器電框圖
評論