<meter id="pryje"><nav id="pryje"><delect id="pryje"></delect></nav></meter>
          <label id="pryje"></label>

          新聞中心

          EEPW首頁 > EDA/PCB > 設計應用 > 用matlab設計的IIR濾波器源程序-IIR一階低通/高通

          用matlab設計的IIR濾波器源程序-IIR一階低通/高通

          作者: 時間:2012-03-22 來源:網絡 收藏

          (9)濾波(chebyshev 1)
          % Lowpass Use Chebyshev Type 1
          % copyright by Etual
          clear;
          fs=20;fpass=4;fstop=5;
          Ap=0.5;As=10;
          wp=2*pi*fpass/fs;ws=2*pi*fstop/fs;
          omegap=tan(wp/2);omegas=tan(ws/2);
          ep=sqrt(10^(Ap/10)-1);
          es=sqrt(10^(As/10)-1);
          e=es/ep;w=omegas/omegap;
          N=ceil(log(e+sqrt(e^2-1))/log(w+sqrt(w^2-1)));
          a=log(1/ep+sqrt(1/ep^2+1))/N;
          omega0=omegap*sinh(a);
          K=floor(N/2);
          theta=zeros(1,K);omega=zeros(1,K);
          for i=1:K
          theta(i)=pi*(N-1+2*i)/(2*N);
          end
          for i=1:K
          omega(i)=omegap*sin(theta(i));
          end
          G=zeros(1,K);a1=zeros(1,K);a2=zeros(1,K);
          for i=1:K
          G(i)=(omega0^2+omega(i)^2)/(1-2*omega0*cos(theta(i))+omega0^2+omega(i)^2);
          end
          for i=1:K
          a1(i)=2*(omega0^2+omega(i)^2-1)/(1-2*omega0*cos(theta(i))+omega0^2+omega(i)^2);
          end
          for i=1:K
          a2(i)=(1+2*omega0*cos(theta(i))+omega0^2+omega(i)^2)/(1-2*omega0*cos(theta(i))+omega0^2+omega(i)^2);
          end
          if K(N/2)
          G0=omega0/(omega0+1);a0=(omega0-1)/(omega0+1);
          else
          H0=sqrt(1/(1+ep^2));
          end
          f=0:1/300:10;
          Hf2=1./(1+ep^2*(cheby(N,tan(pi*f/fs)/omegap)).^2);
          plot(f,abs(Hf2));
          grid;
          (9)濾波(chebyshev 1)
          % IIR Lowpass Use Chebyshev Type 2
          % copyright by Etual
          clear;
          fs=20;fpass=4;fstop=5;
          Ap=0.5;As=10;
          wp=2*pi*fpass/fs;ws=2*pi*fstop/fs;
          omegap=tan(wp/2);omegas=tan(ws/2);
          ep=sqrt(10^(Ap/10)-1);
          es=sqrt(10^(As/10)-1);
          e=es/ep;w=omegas/omegap;
          N=ceil(log(e+sqrt(e^2-1))/log(w+sqrt(w^2-1)));
          a=log(es+sqrt(es^2+1))/N;
          omega0=omegas/sinh(a);
          K=floor(N/2);
          for i=1:K
          theta(i)=pi*(N-1+2*i)/(2*N);
          end
          for i=1:K
          omega(i)=omegas/sin(theta(i));
          end
          for i=1:K
          G(i)=(1+omega(i)^-2)/(1-2*omega0^-1*cos(theta(i))+omega0^-2+omega(i)^-2);
          end
          for i=1:K
          a1(i)=2*(1-omega0^-2+omega(i)^-2)/(1-2*omega0^-1*cos(theta(i))+omega0^-2+omega(i)^-2);
          end
          for i=1:K
          a2(i)=(1+2*omega0^-1*cos(theta(i))+omega0^-2+omega(i)^-2)/(1-2*omega0^-1*cos(theta(i))+omega0^-2+omega(i)^-2);
          end
          for i=1:K
          b1(i)=2*(1-omega(i))/(1+omega(i));
          end
          if K(N/2)
          G0=omega0/(omega0+1);a0=(omega0-1)/(omega0+1);
          else
          H0=sqrt(1/(1+ep^2));
          end
          f=(0+eps):1/100:10;
          Hf2=(cheby(N,omegas./tan(pi*f/fs))).^2./((cheby(N,omegas./tan(pi*f/fs))).^2+es^2);
          plot(f,abs(Hf2));
          grid;

          (10)chebyshev 中用到的函數 cheby.m
          function CN=cheby(N,x)
          if x=1
          CN=cos(N*acos(x));
          else
          CN=cosh(N*log(x+sqrt(x.^2-1)));
          end

          濾波器相關文章:濾波器原理


          濾波器相關文章:濾波器原理


          低通濾波器相關文章:低通濾波器原理


          電源濾波器相關文章:電源濾波器原理


          高通濾波器相關文章:高通濾波器原理
          數字濾波器相關文章:數字濾波器原理

          上一頁 1 2 3 下一頁

          關鍵詞: IIR matlab 濾波器 低通

          評論


          相關推薦

          技術專區

          關閉
          看屁屁www成人影院,亚洲人妻成人图片,亚洲精品成人午夜在线,日韩在线 欧美成人 (function(){ var bp = document.createElement('script'); var curProtocol = window.location.protocol.split(':')[0]; if (curProtocol === 'https') { bp.src = 'https://zz.bdstatic.com/linksubmit/push.js'; } else { bp.src = 'http://push.zhanzhang.baidu.com/push.js'; } var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(bp, s); })();